What’s in the box

  • Scooch MagMount
  • Magnetic Ring
  • Wet & Dry Wipes
  • Extra 3M Adhesive

Installation Instructions

  1. Find a spot on your dashboard that is in a good position for viewing your device. The best location to affix the MagMount is a flat, glossy plastic surface on your car’s dash.
  2. Use the included wet wipe to wipe down the area.
  3. Use the included dry wipe to wipe down the area. Make sure the area is clear of dust or residue.
  4. Press the mount firmly onto the newly cleaned spot on your dashboard, and hold it for 15 seconds.
  5. If your phone isn’t already compatible with MagSafe, apply the included magnetic ring onto your phone case, stick your phone onto the newly affixed MagMount, and enjoy!

How to remove the MagMount (if needed)

  1. Use an old credit card or dental floss to get underneath the adhesive and gently pry it off (it’s very strong). DO NOT try to pull the MagMount straight off your dash. It will most likely damage it.
  2. Remove any remaining adhesive from the bottom of the MagMount.
  3. Take the included extra adhesive from your MagMount package and put it on the base of the MagMount.
  4. Find a new spot to place your MagMount.
  5. Follow the same steps from the installation section above.

FAQ

Will my case work with the MagMount?
The MagMount works best with the Scooch MagCase, but it can work with any case thanks to the included magnetic ring!
Where should I put the magnetic ring?
The best placement is on the outside of your phone case, centered around the Apple logo.
If I have a MagCase, do I need the included magnetic ring?
Nope! The MagCase is natively compatible with the MagMount. The ring is included for people who don’t have MagSafe-compatible cases.
Are the magnets in the MagMount safe for my phone?
Yes! Your phone is 100% safe from the magnets.
Does the steel ring work with wireless charging?
Yes! The ring works with MagSafe charging and Qi wireless charging.